 
| Subject: | |
| From: | |
| Reply To: | TechNet E-Mail Forum. |
| Date: | Fri, 11 May 2001 15:17:31 -0500 |
| Content-Type: | multipart/mixed |
| Parts/Attachments: |
|
|
Our standard is that if a part can not be positively identified on the part itself. The original reel would be verified to a component on the assembly and a component off of the reel. They must match (color, termination style, width, length). If the part is still not able to be identified then a component will be removed and tested with the appropriate test equipment.
Kathy
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.2614.3500" name=GENERATOR></HEAD>
<BODY style="FONT: 10pt Haettenschweiler; MARGIN-LEFT: 2px; MARGIN-TOP: 2px">
<DIV>Our standard is that if a part can not be positively identified on the part
itself. The original reel would be verified to a component on the assembly and a
component off of the reel. They must match (color, termination
style, width, length). If the part is still not able to be identified then
a component will be removed and tested with the appropriate test
equipment. </DIV>
<DIV> </DIV>
<DIV>Kathy</DIV></BODY></HTML>
|
|
|
