> Hello All,
>       This Question was raised by one of our engineers. Please copy
> [log in to unmask] with your response. Thank you in advance for your
> inputs.
>
>       We need to rate and to test a board used at High Voltages.
>
>       A Printed Wiring Board (IPC-4101/42) is occasionally subjected to DC
> voltages around 3.5kV for a time duration of about one hour. Clearances
> and geometry have been selected per applicable standards. The finished
> assembly receives a heavy coating of an insulating polymer over all
> portions subjected to High Voltages.
>  The board is used in an application where any breakdown would be
> unacceptable.
>
>       The bare-board drawing presently specifies a voltage rating of 100V
> DC except for the HV portion(s) which are rated at 4500 VDC.
>       A PWB manufacturer has stated that this requires them to perform
> Hipot tests at 2 x 4500VDC or 9kVDC. This level is excessive, in our
> estimation.
>
>
>  What we need to know is:
>
>  1). If portions of the PWB are rated for 4500 VDC, what testing and what
> voltage levels should be used? It is desirable to test every board, in
> addition to test coupons, due to the critical nature of the application.
>
>  2). What level of current limiting should be used? It is thought by us
> that some Hipot testers may only indicate a test failure once the current
> level reached a few milliamperes and this level may be damaging to the
> PWB.
>
>
>  Thanks in advance.
>
>
>  Sandor
>
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------