Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 2 Aug 2000 14:26:06 -0500 |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
Hello on-line gurus...
I had such a positive response to our request for reliability help, I
thought I'd try again.
We are bidding on the development/production contract for an Electronic
Engine Controller for a general aviation powerplant.
Can you suggest, off-line please, assembly houses that could
"build-to-print" the following:
requirement: IPC J-STD-001 Class 3
board 1: 8-layer, 11" x 11" FR-4 board
technology 1: double-sided SMT with through-hole connectors, headers - two
272-pin BGAs - two pressure transducers
board 1: 4-layer (maybe 6), 3" x 3" FR-4
technology 2: SMT with through-hole headers
testing: verify continuity, correct polarization, missing parts
conformal coat: acrylic
quantity: 500/yr starting in '02 (both boards)
plant location: prefer Midwest, but not a hard requirement
BOM and preliminary schematics available. Layout very soon.
Regards,
Dave Hipp
Woodward Aircraft Engine Systems
Electrical Production Engineering
(815) 639-6732
FAX (815) 639-6040
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|