Hello on-line gurus... I had such a positive response to our request for reliability help, I thought I'd try again. We are bidding on the development/production contract for an Electronic Engine Controller for a general aviation powerplant. Can you suggest, off-line please, assembly houses that could "build-to-print" the following: requirement: IPC J-STD-001 Class 3 board 1: 8-layer, 11" x 11" FR-4 board technology 1: double-sided SMT with through-hole connectors, headers - two 272-pin BGAs - two pressure transducers board 1: 4-layer (maybe 6), 3" x 3" FR-4 technology 2: SMT with through-hole headers testing: verify continuity, correct polarization, missing parts conformal coat: acrylic quantity: 500/yr starting in '02 (both boards) plant location: prefer Midwest, but not a hard requirement BOM and preliminary schematics available. Layout very soon. Regards, Dave Hipp Woodward Aircraft Engine Systems Electrical Production Engineering (815) 639-6732 FAX (815) 639-6040 ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################