Does anyone have experience with using Vertical AMP Mictor Connectors to
mate daughter cards to a mother card. I have an application where multiple
daughter cards are mated to a system board via mictors. The problems occur
with cards that have 3 or more mictors per daughter card mating to the
mother board. I suspect alignment b/w mictors to be the problem b/c when I
only use one connector to mate to another board we have seen no mating
errors. Our process currently has the mictors hand inserted before reflow.
Help, the next products have as many as 9 mictor connectors on a daughter
card.
Thanks
Tim Stammely
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################