Does anyone have experience with using Vertical AMP Mictor Connectors to mate daughter cards to a mother card. I have an application where multiple daughter cards are mated to a system board via mictors. The problems occur with cards that have 3 or more mictors per daughter card mating to the mother board. I suspect alignment b/w mictors to be the problem b/c when I only use one connector to mate to another board we have seen no mating errors. Our process currently has the mictors hand inserted before reflow. Help, the next products have as many as 9 mictor connectors on a daughter card. Thanks Tim Stammely _______________________________________________________ Say Bye to Slow Internet! http://www.home.com/xinbox/signup.html ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################