TECHNET Archives

May 2000

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: J-STD-001 implementation from Mil2000
From:
Douglas Pauls <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 8 May 2000 08:23:36 EDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (30 lines) 
In a message dated 05/05/2000 4:13:34 PM US Eastern Standard Time,
[log in to unmask] writes:

> The Technical Paper Doug references below is available from our web site
> bookstore (www.ipc.org) or customer service (847.790.5362) as IPC-TP-1090 "
> The Layman's Guide to Qualifying New Fluxes for MIL-STD-2000A or MT-0002"

Jack,
This was the first Layman's Guide that I did (affectionately called Schmuck
1).  The document that I referred to recently was my second Layman's Guide
(or Schmuck 2).  I think I turned it in to IPC for their use.  If not, I can
do so.  I am working on a Schmuck 3 for Rev C, but need to understand that
spec a little better first.

Doug

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2