Hello everyone!

Our company is currently considering setting up standard guidelines for
Polyimide Board Rework & Repair.  I have checked the latest IPCs (7711 &
7721), but neither give a clear cut answer to my questions.  I was wondering
if maybe some of you could let me know what procedures you are following or
recommend.

Primarily, we want to know if preheating or baking out a board prior to
rework is required.  If so, what temperature and for how long?  (This is a
component loaded board, so we cannot exceed 85C).  How long is considered
too long out of  "dry" storage before another bake-out is required to drive
off any moisture absorption?  And lastly, does anyone have any diffusion
coefficient data for different types of Conformal Coating (i.e. Conathane
CE-1175)?

Any information would be greatly appreciated.

Thank you!
Shala Burdette

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################