> -----Original Message-----
> From: Mike Lang [SMTP:[log in to unmask]]
> Sent: Thursday, January 20, 2000 1:10 PM
> To:   [log in to unmask]
> Subject:      Re: [TN] Test pad size for flying probe tester
>
> Can someone here please go into a little detail about flying probe
> testing.  Information such as benefits,
>
        no fixtures needed / no limitation on board density / you can test
anything anytime

>  limitations,
>
        kind of slow but this is very relative, nothing is slower than a
fixture which does not work or rejects good boards.

>  rates, test coverage,
>
        100%

>  etc would be nice.  I know very little about them.
>
        please contact me offline if you would like further details

        Wolfgang


> >>> [log in to unmask] 01/17/00 02:20AM >>>
> We design for ICT testing, but need to use flying probe until the board is
> stable enough to go to ICT.
>
> Our board loading contractor is having difficulty probing our 0.032"
> (0.8mm) test via's with their flying probe tester. They want us to go to
> 0.040" (1.0mm) pads on new designs.
>
> Any comments?
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################