> -----Original Message----- > From: Mike Lang [SMTP:[log in to unmask]] > Sent: Thursday, January 20, 2000 1:10 PM > To: [log in to unmask] > Subject: Re: [TN] Test pad size for flying probe tester > > Can someone here please go into a little detail about flying probe > testing. Information such as benefits, > no fixtures needed / no limitation on board density / you can test anything anytime > limitations, > kind of slow but this is very relative, nothing is slower than a fixture which does not work or rejects good boards. > rates, test coverage, > 100% > etc would be nice. I know very little about them. > please contact me offline if you would like further details Wolfgang > >>> [log in to unmask] 01/17/00 02:20AM >>> > We design for ICT testing, but need to use flying probe until the board is > stable enough to go to ICT. > > Our board loading contractor is having difficulty probing our 0.032" > (0.8mm) test via's with their flying probe tester. They want us to go to > 0.040" (1.0mm) pads on new designs. > > Any comments? > > ############################################################## > TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c > ############################################################## > To subscribe/unsubscribe, send a message to [log in to unmask] with > following text in > the body: > To subscribe: SUBSCRIBE TECHNET <your full name> > To unsubscribe: SIGNOFF TECHNET > ############################################################## > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for > additional > information. > If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or > 847-509-9700 ext.5365 > ############################################################## > > ############################################################## > TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c > ############################################################## > To subscribe/unsubscribe, send a message to [log in to unmask] with > following text in > the body: > To subscribe: SUBSCRIBE TECHNET <your full name> > To unsubscribe: SIGNOFF TECHNET > ############################################################## > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for > additional > information. > If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or > 847-509-9700 ext.5365 > ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or 847-509-9700 ext.5365 ##############################################################