TECHNET Archives

February 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Matthias Mansfeld <[log in to unmask]>
Reply To:
Date:
Tue, 15 Feb 2000 17:18:22 +0100
Content-Type:
text/plain
Parts/Attachments:
text/plain (59 lines)
On 15 Feb 00 at 8:43, Tom Kropski wrote:

> I've encountered an error with 274x that I believe said "G36 code
> found, will display outline" and fills don't display accurately.
> Any Ideas??

.. that means probably your Gerber viewer or CAM software is not
capable to display the filled polygon. Which gerber viewer do you
use? (BTW, some old versions of reasonable, expensive CAM software
can't handle this, like the old DOS ECAM versions. I love the option
in my CAM output to "paint" polygones with line draws instead of
using the full RS274X possibilities)

G36*
X2Y4D2*
X7D1*
Y7D1*
X2D1*
Y4D1*
G37*

G36 means all from here up to the next G37 is a filled polygon. If
you or your CAM software forgets the G36, G37, then it remains a
standard drawn line with the last current aperture - you see drawn
the polygon outline only. Your software seems to be a bit more
intelligent: It can't display it correctly, bur it knows at least
that this is something special and not only a dumb drawed line.

If you're interested and the Gerbers are not highly confidential,
send me the file, I 'll check it with my CAM350  (which is able to
handle this stuff) and with my old old DOS based GC-PREDITOR (which
might be able, but I don't know exacly, had no such stuff to
check in these ancient times)

HTH, best regards

Matthias Mansfeld
-----------------------------------------------
Matthias Mansfeld Elektronik
* Printed Circuit Board Design and Assembly
Am Langhoelzl 11, D-85540 Haar, GERMANY
Phone: +49-89-4620 0937, Fax: +49-89-4620 0938
E-Mail: [log in to unmask]
Internet: http://www.mansfeld-elektronik.de

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2