I suggest you engrave a number on each tool and then have the reference
documentation on the wall nearby.  Another way would be to drill a hole
somewhere on the handle or cable and use a brass dog-tag with the
calibration number.

<attachment>
From: Ashok Dhawan
Sent: Tuesday, February 22, 2000 10:24 AM
To: [log in to unmask]
Subject: [TN] calibration Labelling
I am looking for suggestions/ advise from others to solve a problem
as explained below:

In our facility, we use three different kind of Toquing tools :
Manual 9 TorqueLeader)
Pnuematic
Electric
We are looking for a way to attach label or any other way to
associate Calibration date and Torque Rating information. We cannot engrave
as info need to be updated whenever tool is converted to different setting
or recalibrated.  One of solution can be use of temper proof labels but we
do not know where to get from  There could be a number of other methods -
Please suggest how you
handle that.

--

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################