I suggest you engrave a number on each tool and then have the reference documentation on the wall nearby. Another way would be to drill a hole somewhere on the handle or cable and use a brass dog-tag with the calibration number. <attachment> From: Ashok Dhawan Sent: Tuesday, February 22, 2000 10:24 AM To: [log in to unmask] Subject: [TN] calibration Labelling I am looking for suggestions/ advise from others to solve a problem as explained below: In our facility, we use three different kind of Toquing tools : Manual 9 TorqueLeader) Pnuematic Electric We are looking for a way to attach label or any other way to associate Calibration date and Torque Rating information. We cannot engrave as info need to be updated whenever tool is converted to different setting or recalibrated. One of solution can be use of temper proof labels but we do not know where to get from There could be a number of other methods - Please suggest how you handle that. -- ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or 847-509-9700 ext.5365 ##############################################################