随着高科技的日新月异,越来越多的通用标准已经过时,已经不能满足当前的需要,,当
前的业界的标准不能与时俱进,这是一个大家都关注的问题.但没有共鸣
赵艳提出的这个问题只是反映了其中的一种现象.
Regards.
FP Deng
Manufacturing Engineering
Tel: +86-0769-83394581-260 email:[log in to unmask]
www.celestica.com
Solid Partners. Flexible Solutions.
周利文 <[log in to unmask]>
2008-06-19 10:22
To
"'Asia Committe Task Group Forum'" <[log in to unmask]>, "'FP Deng'"
<[log in to unmask]>
cc
Subject
答复: [TGA] 答复: Re: [TGA] 有关激光分板的可靠性问题
针对激光分板机，我去年有评估过，存在板边碳化现象。
后来，我再找了一家，用带5轴步过马达驱动机械平台，再装上高速铣刀，可以实现
。
但效率有点低，外观很漂亮。
以上，请参考。
谢谢！！
绝望中寻找希望，人生终将辉煌！
★★★★★★★★★★★★★★★★★★★★★★★★
制造处工程部/MF
Tel:0755-27599666 3909
Fax:0755-27572730
Mailto:[log in to unmask]
Eaton Group-Phoenixtec Power Co., Ltd.
★★★★★★★★★★★★★★★★★★★★★★★★
发件人: TGAsia [mailto:[log in to unmask]] 代表 FP Deng
发送时间: 2008年6月18日 17:20
收件人: [log in to unmask]
主题: Re: [TGA] 答复: Re: [TGA] 有关激光分板的可靠性问题
最近几年出来的此类设备,速度相对比原来增加了许多,当然,如果想用此类设备,当然
应该考虑它的生产能力,是否经济,灵活,实用和它对产品的影响.
现在已经有许多公司用激光切割机分板,因其外观质量是可控制的. 这可能是个趋势
吧. FYI
Regards.
FP Deng
Manufacturing Engineering
Tel: +86-0769-83394581-260 email:[log in to unmask]
www.celestica.com
Solid Partners. Flexible Solutions.
[log in to unmask]
2008-06-18 16:49
To
Asia Committe Task Group Forum <[log in to unmask]>, FP Deng
<[log in to unmask]>
cc
[log in to unmask]
Subject
答复: Re: [TGA] 有关激光分板的可靠性问题
前年实验过，有两个问题，FYI：
1、分板效率低（前年的制程水平如此，不知现在效率如何）
2、外观有问题，不如铣板和V-CUT美观。
Best Regards，
Charlie Zhao （Ying Jun Zhao）
******************************************
Emerson Network Power C0.,Ltd
Pilot Electronic Technology Dept.
No.1 Kefa Road，Science & industry Park
Nanshan District，518057
Shenzhen，China
Tel：86-0755-86010808 86011282(Direct)
Fax：86-0755-86010261 86011484
E-mail：[log in to unmask]
Website：www.emersonnetworkpower.com.cn
==========================================
This email message, including any attachments, is for the sole use of the
intended recipient(s) and may contain confidential and privileged
information from Emerson Network Power Co., Ltd. or its affiliates and
subsidiaries. If you have received it in error, you are hereby notified
that review, use, disclosure or distribution of this message is
prohibited. Please advise the sender by reply e-mail and immediately
delete the message and any attachments without copying or disclosing the
contents. Thank you.
FP Deng <[log in to unmask]>
发件人： TGAsia <[log in to unmask]>
2008-06-18 15:52
请答复 给 Asia Committe Task Group Forum; 请答复 给 FP Deng
收件人： [log in to unmask]
抄送：
主题： Re: [TGA] 有关激光分板的可靠性问题
这是个很好的LEAN project,用激光切割机分板还是切实可行的,它的影响只是外观问
题,最重要的的是能够说服你的客户并能够接受........
Regards.
FP Deng
Manufacturing Engineering
Tel: +86-0769-83394581-260 email:[log in to unmask]
www.celestica.com
Solid Partners. Flexible Solutions.
Renie Zhao <[log in to unmask]>
Sent by: TGAsia <[log in to unmask]>
2008-06-18 15:37
Please respond to
Asia Committe Task Group Forum <[log in to unmask]>; Please respond to
Renie Zhao <[log in to unmask]>
To
[log in to unmask]
cc
Subject
Re: [TGA] 有关激光分板的可靠性问题
我们现在用的都是Router 或者使Punching, 但发现夹具成本费非常高，如果用激光
自动切割的话，可以省掉不同产品的夹具成本， 也可以提高激光机的应用灵活性。
Best regards
Renie Zhao (赵艳)
Phone: +86-13543085801
Email: [log in to unmask]
From: NG ENG GUAN [mailto:[log in to unmask]]
Sent: Wednesday, June 18, 2008 3:27 PM
To: 'Asia Committe Task Group Forum'; Renie Zhao
Subject: RE: [TGA] 有关激光分板的可靠性问题
赵艳小姐,
你好. 我觉的因该不行. 关键是,有必要用激光切割机进行分板吗?
From: TGAsia [mailto:[log in to unmask]] On Behalf Of Renie Zhao
Sent: 18 June 2008 15:18
To: [log in to unmask]
Subject: [TGA] 有关激光分板的可靠性问题
Dear All:
为了提高PCBA 的分板效率，我们试图用激光切割机进行分板，但是在分板过程中总
是有碳化现象， 我们也进行了可靠性测试（功能，跌落，温湿循环，热冲击， 功能
），发现即使有轻微碳化现象，也不影响PCBA 的性能。有关此事请教大家下面几个
问题：
1. 在IPC 的标准中，用激光进行PCBA的分割，是否允许有轻微碳化现象？
2. 如果不允许，在我们进行了一系列的可靠性 测试之后，如果确认轻微碳
化并不影响其性能，那么有没有可能根据实际更改一下IPC 的标准？
Best regards
Renie Zhao (赵艳)
Phone: +86-13543085801
Email: [log in to unmask]
From: TGAsia [mailto:[log in to unmask]] On Behalf Of Leo Zhang
Sent: Tuesday, June 17, 2008 10:52 AM
To: [log in to unmask]
Subject: [TGA] 交流（镀金）
Dear ALL，
请问哪位对镀金（工艺/工序）比较了解，我有一些问题想请教和交流一下，谢谢！
Best Regards
Leo Zhang 张毅博
==========================================
Engineering
SZ Kaifa Mirco Electronics Co., Ltd.
7006#,CaiTian Road,ShenZhen,China.
Direct Line : (86-755) 83032983
Tel : (86-755) 83275000 Ext.36274/33983
Fax : (86-755) 83275514
Mobile :(86)13728767036
Email : [log in to unmask]
[log in to unmask]
==========================================
This message has been scanned.
(210.245.235.14)
Legal Disclaimer: The information contained in this message may be
privileged and confidential. It is intended to be read only by the
individual or entity to whom it is addressed or by their designee. If the
reader of this message is not the intended recipient, you are on notice
that any distribution of this message, in any form, is strictly
prohibited. If you have received this message in error, please immediately
notify the sender and delete or destroy any copy of this message
Legal Disclaimer: The information contained in this message may be
privileged and confidential. It is intended to be read only by the
individual or entity to whom it is addressed or by their designee. If the
reader of this message is not the intended recipient, you are on notice
that any distribution of this message, in any form, is strictly
prohibited. If you have received this message in error, please immediately
notify the sender and delete or destroy any copy of this message
|
