Subject: | |
From: | |
Reply To: | |
Date: | Wed, 27 Jul 2011 18:58:12 +0800 |
Content-Type: | multipart/mixed |
Parts/Attachments: |
|
|
附件中有关于锡须机理和现象的录像,可下载,供参考。
----- Original Message -----
From: sonic.lu Thanks and Best Regards Sonic Lu 陆尚 Process Engineer Autoliv Electronics China (ACE) Co.,Ltd Tel: +86-21-67109300-3162 *************************************************************** Consider the environment before printing this message. To read Autoliv's Information and Confidentiality Notice, follow this link: http://www.autoliv.com/disclaimer.html *************************************************************** ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
To: [log in to unmask]
Sent: Tuesday, July 26, 2011 5:12 PM
Subject: Re: [TGAsia] 锡须
锡须主要在无铅工艺中常见。锡须产生行业内的通常的认识是由于高锡状况下,原子间的内应力而产生的挤压效应
想避免锡须主要从焊锡膏的选择做起,锡膏要是不好就会出现异常的几率较大,另外要确保焊锡充分熔融,如果充分熔融,焊锡膏的内应力消散比较好,产生锡须的几率会下降
Thanks and Best Regards
Sonic Lu 陆尚
Process Engineer
Autoliv Electronics China (ACE) Co.,Ltd
Tel: +86-21-67109300-3162
Kevin Chen <[log in to unmask]>
Sent by: TGAsia <[log in to unmask]>
2011-07-26 10:54 Please respond to
Asia Committe Task Group Forum <[log in to unmask]>; Please respond to
Kevin Chen <[log in to unmask]>
To <[log in to unmask]>
cc
Subject [TGAsia] 锡须
各位专家
请教一下哪位有关于锡须的经验,想了解一下是锡须是如何产生的,生成条件是什么,如何验证QFN零件下面有没有锡须,以及如何避免锡须得产生。
谢谢!
***************************************************************
Consider the environment before printing this message.
To read Autoliv's Information and Confidentiality Notice, follow this link:
http://www.autoliv.com/disclaimer.html
***************************************************************
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|