Meet 3F request.
also need follow your customer requirements.
 


Date: Tue, 26 Apr 2011 11:22:26 +0800
From: [log in to unmask]
Subject: Re: [TGAsia] 关于PCBA割板是否有IPC定义验收标准
To: [log in to unmask]






请参见IPC-A-610E里10.2.7 里面对分板有对缺口和铣切边的减少有定义，对突出部分自己定义，不影响组装为主兼考虑外观。
 

From: TGAsia [mailto:[log in to unmask]] On Behalf Of Lei Shi
Sent: Tuesday, April 26, 2011 8:26 AM
To: [log in to unmask]
Subject: [TGAsia] 关于PCBA割板是否有IPC定义验收标准
 
各位好： 

     有个问题想请教一下大家，不知道大家是否知道有IPC标准定义了PCBA割板以后的要求，我看了一下610E并没有明确定义这个方面的验收要求，是否只要不影响PCBA在后期的装配工作就没有问题了吗？？谢谢！ 

Best Regards,
Shi Lei

Process Quality Engineering,
Celestica

#448 SuHong Middle Road Suzhou Industry Park,215021
Tel:+86 512 62588111-3602 or 13372147203 
email:[log in to unmask] 

Solid Partners. Flexible Solutions. 
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________
 		 	   		  

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________