Carl,
why don't you build an inexpensive SS plate with equal-length standoffs at
the corners (preferably under tooling holes) and then you can lay the
assembly on it and detect if any corner is lifted.
Jason Gregory
SMT Production Supervisor/
Integrated Product Team Leader
LaBarge Inc.
(918)459-2367
(918)459-2221 fax
[log in to unmask]http://www.labarge.com
Carlr Ray
<Carlr.Ray@SANMIN To: [log in to unmask]
A-SCI.COM> cc:
Sent by: TechNet Subject: [TN] Board warpage
<[log in to unmask]>
04/01/03 04:14 PM
Please respond to
"TechNet E-Mail
Forum."; Please
respond to Carlr
Ray
Any of you guys know how to measure board warpage after the unit has been
completely process?
Process:
SMT Bottom
SMT Top
PTH Axial and Radial
Hand loaded
Wave Solder
Post wave processing
At my Incoming receiving area I can detect board warpage but after the
wave process (sometimes SMT Top) the boards start to warp. All the profiles
have been verified and validated.
We know we have a vender issue but the problem is our customer will not
accept the unit we have in process (around 500). So if anyone has any
suggestions it would be greatly appreciated.
Carl Ray
Sr. Manufacturing Engineer
Huntsville, AL 35807
Phone: 256-882-4800 ext. 8845
Cell: 256-990-1990
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------