TECHNET Archives

March 2018

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
TechNet <[log in to unmask]>
X-To:
[log in to unmask]
Date:
Wed, 14 Mar 2018 15:22:15 -0500
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Wayne Showers <[log in to unmask]>
Subject:
Re: Wave soldering with SMT parts on bottom of board
MIME-Version:
1.0
Message-ID:
<[log in to unmask]>
Content-Type:
text/plain; charset="utf-8"
Content-Transfer-Encoding:
quoted-printable
From:
Wayne Showers <[log in to unmask]>
Parts/Attachments:
text/plain (7 lines) 
Carl, I don't know what 200 pin connector you are using, but if it is SAMTEC, they often have HT (High Temp) versions available.  At that point, I would point you in the direction of Metal Etch Services to design a proper stencil to get good hole fill from Intrusive (Pin-In-Paste) soldering.  
You can also email or call me directly and I will help you out.

Respectfully,
Wayne Showers,   NPI/Technical Manager, [log in to unmask]
4Front Solutions, 8140 Hawthorne Drive, Erie, PA 16509	Ph: 814-464-2060	Cell: 570-567-4110

ATOM RSS1 RSS2