Kidding aside, I did once work for a company that got dinged for a non-calibrated tape measurer. A flight cable was out of spec (too short, cable stretcher was down), and they re-checked it with the tape measurer used in the shop (probably bought at the dollar store) and it measured correctly. Turned out the tape measurer was printed a bit off, so over 6 ft+, it added up significantly!
Ed Popielarski
Engineering Manager
970 NE 21st Ct.
Oak Harbor, Wa. 98277
Ph: 360-675-1322
Fx: 206-624-0695
Cl: 360-544-2289
"It's one kind of victory to slay a beast, move a mountain, and cross a chasm, but it's another kind altogether to realize that the beast, the mountain, and the chasm were of your own design."
https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Graham Collins
Sent: Wednesday, June 29, 2016 11:32 AM
To: [log in to unmask]
Subject: Re: [TN] wire harness fixtures
What values are appropriate for toes?
I once worked with some QA who were insistent that a metal ruler being used to measure a length with a tolerance of +- .25" - had to be calibrated.
regards,
Graham Collins
Senior Process Engineer
Sunsel Systems
(902) 444-7867
Note: new address! We have moved to 433 Cutler Avenue Dartmouth Nova Scotia B3B 0J5
On 6/29/2016 3:19 PM, John Burke wrote:
You will need one thumb and a decibel meter......
Below 500 gram hammer 40+ dB is a pass
500 - 1000 grams 60+ dB is a pass
1000 + grams - a trip to the ER is a pass
All assuming a 1 meter drop.
Best regards,
John Burke
On Jun 29, 2016, at 11:13 AM, Ed Popielarski <[log in to unmask]><mailto:[log in to unmask]> wrote:
Does hammer need calibration per AS9100?
Ed Popielarski
Engineering Manager
970 NE 21st Ct.
Oak Harbor, Wa. 98277
Ph: 360-675-1322
Fx: 206-624-0695
Cl: 360-544-2289
"It's one kind of victory to slay a beast, move a mountain, and cross a chasm, but it's another kind altogether to realize that the beast, the mountain, and the chasm were of your own design."
https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Graham Collins
Sent: Wednesday, June 29, 2016 9:15 AM
To: [log in to unmask]
Subject: [TN] wire harness fixtures
Harness board nails:
- Panduit makes them with the shoulder, near the edge.
- E-Z Hook makes nails with no shoulder.
I've used the E-Z hook ones - no big deal to get the nails about the same height. Standard hammer works fine.
regards,
Graham Collins
Senior Process Engineer
Sunsel Systems
(902) 444-7867
Note: new address! We have moved to 433 Cutler Avenue Dartmouth Nova Scotia B3B 0J5
On 6/29/2016 12:57 PM, Bob Wettermann wrote:
Alright ....some of us are working.
Perhaps someone can help with a "<[log in to unmask]:[TN]wireharnessfixturesHarnessboardnails:-Panduitmakesthemwiththeshoulder,neartheedge.-E-ZHookmakesnailswithnoshoulder.I'veusedtheE-Zhookones-nobigdealtogetthenailsaboutthesameheight.Standardhammerworksfine.regards,GrahamCollinsSeniorProcessEngineerSunselSystems(902)444-7867Note:newaddress!Wehavemovedto433CutlerAvenueDartmouthNovaScotiaB3B0J5On6/29/201612:57PM,BobWettermannwrote:Alright....someofusareworking.Perhapssomeonecanhelpwitha" target="_blank">https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A-----OriginalMessage-----From:TechNet[mailto:[log in to unmask]]OnBehalfOfGrahamCollinsSent:Wednesday,June29,20169:15AMTo:[log in to unmask]:[TN]wireharnessfixturesHarnessboardnails:-Panduitmakesthemwiththeshoulder,neartheedge.-E-ZHookmakesnailswithnoshoulder.I'veusedtheE-Zhookones-nobigdealtogetthenailsaboutthesameheight.Standardhammerworksfine.regards,GrahamCollinsSeniorProcessEngineerSunselSystems(902)444-7867Note:newaddress!Wehavemovedto433CutlerAvenueDartmouthNovaScotiaB3B0J5On6/29/201612:57PM,BobWettermannwrote:Alright....someofusareworking.Perhapssomeonecanhelpwitha>low tech" question regarding the wiring boards used for wire harnesses.
Most users I visit have simple finishing nails nailed in to plywood to fix cable routing.
Recently I saw a user using a specialty nail with a rounded head and a nail end that was tapered. In addition they had approximately 1/2 way along the nails' length a landing pad that was a way to make sure that all of the nails were at the same height.
Anyone familiar with these nails? Looks like a specialty tool needs to be used to bang them in to a wiring harness board.
Thanks!
Happy 4th...remember to let go of the fireworks after you light them!
On Wed, Jun 29, 2016 at 9:50 AM, George Wenger <[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
wrote:
I am also here
----- Original Message -----
From: "Victor Hernandez" <[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
To: [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
Sent: Wednesday, June 29, 2016 10:03:51 AM
Subject: Re: [TN] Anyone at home?
I am here... It's been quite....
Victor,
-----OI am here....original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
Sent: Wednesday, June 29, 2016 8:43 AM
To: [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
Subject: [TN] Anyone at home?
No messages for 2 days
Brian
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|