Technetters,
I am looking for recommendations for solder stencil aperture or aperture
reduction for a CSP BGA that has 0.30 mm balls and 0.5 mm spacing
(pitch). On same size balls, but larger pitch we have used 0% reduction
with great success. This time this ended in disaster with shorts across
pretty much all the balls. We are using T5 SAC305 solder (yes, we are
still sticking to that) and a 6 mil stencil. I am thinking about a 50%
reduction, but I am concerned that the deposit efficiency will be
terrible and cause opens.
Thank you in advance.
--
Leif Erik Laerum
Quality Assurance Manager
Texas Memory Systems
[log in to unmask]
Tel: (713) 266-3200 x468
www.texmemsys.com
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------