TECHNET Archives

August 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Sender:
TechNet Mail Forum<[log in to unmask]>
Subject:
Re: Subj: Alternative CCA Marking Labels
From:
Aric J Parr <[log in to unmask]>
Date:
Tue, 19 Aug 1997 15:58:57 -0500
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset=US-ASCII
Reply-To:
"TechNet Mail Forum." <[log in to unmask]>, Aric J Parr <[log in to unmask]>
Parts/Attachments:
text/plain (13 lines) 
I have used ink jet in the past (previous employer). Process control for small
size print was difficult, and legibility varied between laminate, finish, solder
mask, legend ink,... and lots from the same PCB supplier.

I have heard of laser marking, and even used it almost 10 years ago. It is
difficult to laser solder mask or legend ink without exposing any copper below
the etch.

______________________________ Reply Separator _________________________________
Subject: [TECHNET] Subj:  Alternative CCA Marking Labels
Author:  Ron Hollandsworth <[log in to unmask]> at INTERNET

ATOM RSS1 RSS2