Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 16 Apr 1999 11:22:10 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello Bill,
The NHB5300.4 (3A-2) was preceded by NASA-STD-8739.3, December 1997.
Below is a website that has this standard listed.
http://standards.nasa.gov/database/nasanumsrch.asp?number=8
The cleaning solvent we've had approved in the microelectronics lab
is Axarel 2200 with a deionize rise although for spot cleaning we only
use the isopropyl alcohol.
Hope this helps
-Sherry
>Fellow tech-net readers:
>
>Does anybody know if the NASA soldering spec NHB5300.4(3A-2), dated 1992 is
>going to be revised ? In many different ways it is behind the times.
>
>One area of my concern is the limited number of solvents that can be used
>according to paragraph 3A312 of this document. Most of the materials listed
>are Ozone Depleting Chemicals, which are more or less banned. We're using
>isopropyl alcohol.
>
>Has anyone working to this spec gotten any different materials for cleaning
>flux, approved by NASA?
>
>Anyone out there using FluxoffCZ, from Chemtronics, for any applications?
>
>Please respond through the net or if you prefer, directly to me at
>[log in to unmask]
>
>Thanks,
>Bill Kasprzak
>Moog Inc.
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
>following text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
>section for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
>847-509-9700 ext.312
>################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|