Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0w1xm1-0007zVC; Tue, 4 Mar 97 11:13 CST |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Tue, 4 Mar 1997 11:32:53 -0600 |
Precedence: |
list |
Resent-From: |
|
Message-ID: |
<01BC288F.CE7771A0@gateway> |
Content-Transfer-Encoding: |
quoted-printable |
Status: |
O |
X-Mailing-List: |
|
From [log in to unmask] Wed Mar 5 14: |
39:34 1997 |
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"WmiKZ2.0.vAN.aW57p"@ipc> |
Subject: |
|
From: |
|
X-Status: |
|
X-Loop: |
|
Resent-Sender: |
|
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Dear technetters,
On Friday I responded to a request for information regarding the application of SPC in printed circuit board manufacturing. I had offered a copy of a training manual which I specifically developed for practical and effective implementation of SPC in PCB manufacturing to the individual asking the question.
Much to my surprise I have since received numerous requests for this information. I was surprised to find so many people are still struggling with implementing an effective yet practical system.
Due to the number of requests I cannot send out that many copies of my training manual free. The costs would be to high for me. However, I will generate an outline of the system sharing some of the philosophy and procedures I have found to work in hope it will assist those of you who are interested. It will take me a couple of days. Unfortunately, my training text is not in memory.
If you are still interested in receiving a complete copy of my training manual, I will be happy to provide it but I will have to ask a small fee ($75.00)to cover the shipping and handling costs. Those of you still interested in obtaining a copy of my manual please contact me off line at [log in to unmask] I will need shipping information and I will invoice you through Graphic Electronics with the shipment. I apologize for the need to charge but there are costs involved when sending a lot of copies and I did develop the course to teach for a fee.
Thank You,
Ed Cosper
Director, Quality Assurance and Engineering
Graphic Electronics Inc.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|