TECHNET Archives

September 2010

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
"TechNet E-Mail Forum ([log in to unmask])" <[log in to unmask]>
Date:
Fri, 10 Sep 2010 19:15:42 +0000
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, "Temkin, Gregg" <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="us-ascii"
From:
"Temkin, Gregg" <[log in to unmask]>
Parts/Attachments:
text/plain (25 lines)
I have been given a new design which has an underfilled leaded BGA on an SnPb soldered assembly (however many passive components are PbF).

The underfill has a snap cure of 160C for 7 minutes after a 90C pre-heat and dispense.  The PCB is FR-4 with a 170Tg min and the assembly is double sided SMT with selective soldered thru hole connectors.  It's is a Class 3 assembly.

From my understanding, components are generally not harmed by a few well controlled SMT cycles consisting of a soak period in the 150-180C range, followed by a ramp-up to 210-235C for reflow.   But in total, they dwell about a third of the time of the snap cure.  Is the snap cure comparatively benign or harmful or are there too many depends?

Appreciate any comments.

Thanks Gregg

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2