Subject: | |
From: | |
Date: | Fri, 21 Feb 97 09:13:35 GMT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Ron,
We are at the present time measuring the solderability degradation
of 10 OSP and 9 non-OSP finishes that were provided by many PCB
manufacturers and chemical suppliers.
This work was part of a larger study carried out here at NPL over the
last 12 months examining the aging properties of these finishes which
not only included natural aging but also reflow performance.
For the natural aging, the PCBS were stored in both laboratory
and "factory" conditions. At this time, we have tested the PCBs after
12 months using a solderability wetting balance.
We also used a wetting balance, a solder dot test, sequential
electrochemical reduction analysis (SERA) and a limited yield
assembly trial for assessment of the reflow properties.
The project had a lot of interesting results including the observation
that many of the OSPs were comparable to the non-OSPs in
performance. There are obviously a lot more details so just drop me
a line and we can have a chat....
Best Regards
Lee Hitchens
>
>
> Techneters:
>
> Does anyone have definitive data/experience with shelf life for OSP
> coated boards? We presently use 6 months but would like to store for
> 12 months. Thanks.
>
> Ron Yanuszewski
> Cabletron Systems, Inc.,
>
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]> *
> * with <subject: subscribe/unsubscribe> and no text in the body. *
> ***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
> ***************************************************************************
>
Lee Hitchens
The National Physical Laboratory
Tel: 0181 943 6583
Fax: 0181 943 6453
email: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|