TECHNET Archives

March 2013

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
TechNet E-Mail Forum <[log in to unmask]>, David Douthit <[log in to unmask]>
Date:
Fri, 8 Mar 2013 09:48:14 -0600
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Larry Dzaugis <[log in to unmask]>
Subject:
From:
Larry Dzaugis <[log in to unmask]>
Message-ID:
In-Reply-To:
Content-Type:
text/plain; charset="ISO-8859-1"
MIME-Version:
1.0
Parts/Attachments:
text/plain (16 lines)
My bane was must coat and must not coat with no transition area.
This was for automated dispensing.
Even with masking to give a sharp edge, there is a tolerance on the
location.
Something should be noted as to need for a tolerance or a don't care area
between the 2, even if it is up to the individual design to specify it.
A paralyene contractor told me he could hold 4 mils. That is not zero and I
hate to think of the price to hold that tolerance.
For the 100 panel/ an hour shops, it has to be larger.


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2