Subject: | |
From: | |
Reply To: | |
Date: | Wed, 8 Jun 2005 22:14:57 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Genny,
The real problem is not solder joint reliability at all, but the reliability
threat posed by the through vias in the PCB. Depending on the details, each
excursion to soldering temperatures consumes about 3 to 6% of the fatigue life
of the vias, starting with HASL. The higher percentage consumptions apply to
LF-soldering. Thus, 1 HASL+2 reflow+3 repair/rework can cost you between 18 and
36% of the life of the vias--and this is assuming good quality vias. But even
this much accumulated fatigue damage is not a real issue--assuming of course,
that failure did not occur during any of these solder excursions--unless the
operating environment produced cyclic delta-T's in excess of 35°C.
Regards,
Werner Engelmaier
Engelmaier Associates, L.C.
Electronic Packaging, Interconnection and Reliability Consulting
7 Jasmine Run
Ormond Beach, FL 32174 USA
Phone: 386-437-8747, Fax: 386-437-8737, Cell: 386-316-5904
E-mail: [log in to unmask], Website: www.engelmaier.com
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|