Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 13 Feb 2002 09:23:10 EST |
Content-Type: |
multipart/alternative;
boundary="part1_51.1906301f.299bd0ce_boundary" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
Hi Rick!
We've got a board here that has some HUGE caps (3.25" tall. 1.25" diameter)
that we stake down to the board and to each other. Go to:
http://www.stevezeva.homestead.com and look at Big Blue Caps.
We use Dow Corning 732....works great for us.
-Steve Gregory-
> We have an application where we need to secure some vertically mounted
> radial electrolytic caps and a few other higher profile items to make
> them resistant to shock, impact and vibration (amusement park
> application). I've contacted Loctite and 3M for recommendations but the
> ones I've gotten have several week lead times, minimum buys due to
> special order, etc. Since we don't know if the products will work, we
> didn't want to buy minimum quantities of materials we can't return.
>
> Does anyone have any recommendations for standard products you may have
> used in similar situations? I realize I can get samples from the mfgs.
> Noted but I was hoping to shorten the lead time if I can find off the
> shelf products that may do the job.
>
> Thanks for your inputs.
>
>
> Rick Thompson
> Ventura Electronics Assembly
> 2655 Park Center Dr.
> Simi Valley, CA 93065
>
> +1 (805) 584-9858 x-304 voice
> +1 (805) 584-1529 fax
> [log in to unmask]
>
|
|
|