Subject: | |
From: | |
Date: | Mon, 10 Jul 1995 14:11:44 -0500 (CDT) |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
The IPC-RF-245, "Performance Specification for Rigid-Flex Printed Boards"
would be the document you need. The test methods refered to in this
document are included in the back.
The RF-245 gives the following information:
Insulation resistance
Class 2 Class 3
As received 500 megohms 500 megohms
After exposure
to moisture 100 megohms 500 megohms
Dielectric withstanding test voltages
Class 2 Class 3
Voltage 500 VDC 500 VDC
Time 30 sec 60 sec
There are no requirements for class 1 on either of these.
The RF-245 is in the process of being re-written. It's new number will be
IPC-P-6013. Anyone interesting in perticipating on this flex document can
contact me. Will are planning an interim meeting the week of August 14 in
Minneapolis.
****************************************************
Jon Holmen
Technical Project Manager
IPC
7380 N. Lincoln Ave
Lincolnwood IL 60646
Phone (708) 677-2850
Fax (708) 677-9570
e-mail [log in to unmask]
*****************************************************
On Mon, 10 Jul 1995 [log in to unmask] wrote:
> What standard do you recommend for purchasing Rigid-Flex Mother Boards.
>
> I particularly need information on testing the bare board. What should the
> values be for isolation resistance and voltage?
>
> Thanks.
>
> Lew Burnett
> Honeywell
> 602-436-4744
> [log in to unmask]
>
>
|
|
|