TECHNET Archives

December 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
TechNet <[log in to unmask]>
Subject:
Pressfit Connector Problem
From:
Lockley Neil <[log in to unmask]>
Date:
Wed, 1 Dec 1999 09:28:56 -0000
Content-Type:
text/plain; charset="iso-8859-1"
MIME-Version:
1.0
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, Lockley Neil <[log in to unmask]>
Parts/Attachments:
text/plain (28 lines) 
Hi All,

I have a query with a Pressfit connector and a backplane. The only suitable
connector available has pins of 4mm in length and the backplane is 4.2mm
thick. Obviously the pins do not protrude through the PCB, will this cause
any problems with reliability, strength etc?

All comments appreciated

Cheers

Neil Lockley
Production Engineer,   TMSL.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2