Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vW0m5-0000XCC; Fri, 6 Dec 96 07:57 CST |
Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
Old-Return-Path: |
|
From [log in to unmask] Fri Dec 6 15: |
25:45 1996 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
MIME-Version: |
1.0 |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
Resent-Message-ID: |
<"_tCyf3.0.gL9.iO2go"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
In-Reply-To: |
|
Message-ID: |
|
Date: |
Fri, 6 Dec 1996 05:24:35 -0500 (EST) |
Parts/Attachments: |
|
|
We've been wave-soldering MELF and SOD80/SOD87 pkgs in large qty's
for about 5 years now. We've had little problem with alignment, using
square pads. The biggest problem we've had is bridging - mostly due
to board density being much higher than ideal. (By large qty, I mean
over 1 million units/yr, with about 8 diodes per unit)
Stew Benedict, CAD Specialist, GE Lighting, Cleveland OH
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|