TECHNET Archives

August 2011

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
TechNet E-Mail Forum <[log in to unmask]>, "James, Susan CAR" <[log in to unmask]>
Date:
Wed, 24 Aug 2011 15:02:41 -0400
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Amol Kane <[log in to unmask]>
Message-ID:
<C23267C3AF7B4842B685FC757EE8A7B8493B393BD6@catvesexch01>
Subject:
From:
Amol Kane <[log in to unmask]>
MIME-Version:
1.0
In-Reply-To:
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="us-ascii"
Parts/Attachments:
text/plain (123 lines)
Steve, would you be kind enough to post it on your website?

Thanks,
Amol




-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of James, Susan CAR
Sent: Wednesday, August 24, 2011 1:02 PM
To: [log in to unmask]
Subject: Re: [TN] Wave Soldering Process Fishbone Diagram

Here's a copy of a fishbone I saved from Inge from "way back" to 2004.  Actual diagram is on page 4.  If this is the one you're looking for, I've sent a copy to Steve to post if he wants to.

 

Regards,

Sue

 

Susan James

Engineer, Taylor Company

a division of Carrier Commercial Refrigeration, Inc.

United Technologies Corporation

 

 

Date:    Wed, 24 Aug 2011 08:17:55 -0400

From:    Steve Gregory <[log in to unmask]>

Subject: Re: Wave Soldering Process Fishbone Diagram

 

Hi Leland,

 

I'm sorry that I didn't respond sooner, I got busy and forgot about your email. I sincerely apologize.

 

I looked for the fishbone that Inge sent, and I couldn't find it. I must have taken it down from my web page when I cleaned it up some months back. But as I recall, I don't think it was specifically for wave soldering. Maybe if Inge has his ears up, he can resend it and I'll post it again on my page.

 

But what I did find is a good reflow/wave problem & trouble-shooting chart put out by Electrovert. I don't know if you've seen it before. I'll send it along with this email...

 

Steve

 

-----Original Message-----

From: TechNet [mailto:[log in to unmask]] On Behalf Of Leland Woodall

Sent: Wednesday, August 24, 2011 6:37 AM

To: [log in to unmask]

Subject: [TN] Wave Soldering Process Fishbone Diagram

 

Folks,

 

A few months ago I remember a fellow TechNetter making available to the group a fishbone diagram of the wave soldering process.  I'm usually pretty good about hanging onto stuff like this, but have apparently misplaced this one.  If someone has a copy, could you please forward me a copy?

 

By the way, Clumpy and his cousin were both helping out quite well until about 2:00 yesterday.  I think the aftershocks of the earthquake kinda shook them up, and they asked for the remainder of the day off.

 

Leland

 


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2