Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 3 Sep 1999 13:40:57 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Jon & Steve,
A less costly option would be a vertical end milling machine like the ones
found at http://www.micro-tools.com/ . They go for around $800.00 and are
more manual in nature. Download the pdf format catalog, they have lots of
neat small tools.
I'm also looking for something similar except I want a stereo microscope
attached to the machine for accurate visual alignment. I might be forced to
work with our e-cad guys and design my own if I can't find what I'm looking
for.
Scott Severson
-----Original Message-----
From: Stephen R. Gregory [mailto:[log in to unmask]]
Sent: Friday, September 03, 1999 1:18 PM
To: [log in to unmask]
Subject: Re: [TN] precision mini-drill-press
In a message dated 09/03/1999 1:01:58 PM Central Daylight Time,
[log in to unmask] writes:
<< Does anyone know where I can get a mini (table-top) drill press with
precision location in XYZ? I used to have one for drilling out PTH in
multi-layer PCB's for design changes/verifications/prototypes. I would
like
to have .001" accuracy in all three axes.
Jon Moore >>
Hi Jon!
I think you're looking for something a little more sophisticated than a
"Dremel" drill huh? If you go to: http://www.t-tech.com/ , they have the
kind
of machines that meets your accuracy specs. They have a machine called
"Proto
Drill", and another called "Quick Circuit" which is a combination
drill/router. The Proto Drill can do holes as small as .008", and the Quick
Circuit can do .013". Both are accurate to .001"...you're looking at around
$20,000 or so...not cheap!
-Steve Gregory-
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|