 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset="us-ascii" |
| Old-Return-Path: |
|
| Date: |
Mon, 27 Jan 1997 06:30:00 -0600 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| Content-Transfer-Encoding: |
7bit |
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| X-Loop: |
|
| Resent-Message-ID: |
<"SXKIp3.0.XmE.AvAxo"@ipc> |
| Subject: |
|
| From: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vorAB-0000UEC; Mon, 27 Jan 97 07:31 CST |
| Message-Id: |
|
| X-Mailer: |
Microsoft Exchange Server Internet Mail Connector Version 4.0.993.5 |
| From [log in to unmask] Mon Jan 27 08: |
42:48 1997 |
| Parts/Attachments: |
|
|
R usually designates the decimal point. 82R5 is 82.5 Ohms, 8R25 would
be 8.25 Ohms, and so on. Hope this helps
Max Bernhardt
----------
From: Jack Ray
To: [log in to unmask]
Subject: Re: DOC:IEC Component value code
Date: Friday, January 24, 1997 7:27PM
Max Bernhardt wrote:
>
> Let me correct that 1013 is 101000 = 101 Kohm's sorry I was sleeping
> again;-)
> ----------
OK Please
We use a 49.9 ohm which is marked 4999, a 10.0 marked 1009, and an 82.5
marked 82R5. Why the 'R' ???
Jack
************************************************************************
***
* TechNet mail list is provided as a service by IPC using SmartList
v3.05 *
************************************************************************
***
* To unsubscribe from this list at any time, send a message to:
*
* [log in to unmask] with <subject: unsubscribe> and no text.
*
************************************************************************
***
* If you are having a problem with the IPC TechNet forum please contact
*
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]
*
************************************************************************
***
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
