 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset="us-ascii" |
| From [log in to unmask] Fri Apr 11 11: |
20:36 1997 |
| Date: |
Thu, 10 Apr 1997 08:36:00 -0500 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| Content-Transfer-Encoding: |
7bit |
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| X-Loop: |
|
| Resent-Message-ID: |
<"8CVpT3.0.62O.JdFJp"@ipc> |
| Subject: |
|
| From: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wFKtD-000BjjC; Thu, 10 Apr 97 09:31 CDT |
| Old-Return-Path: |
|
| X-Mailer: |
Microsoft Exchange Server Internet Mail Connector Version 4.0.994.63 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
To the extent that lead length matters for EMC performance, I would say
having longer leads away from a return path would hurt performance
relative to SMT devices where the circuit paths can be kept close. For
the same reasons, speeds should be higher for SMT.
----------
From: Karras, Steve
To: [log in to unmask]
Subject: Quick Pole
Date: Thursday, April 10, 1997 3:39AM
Hi All,
There have been some discussion between the performance of PTH vs. SMT
style
packages. Some of the power and dig guys feel that the PTH stuff, in
some
cases, respond better than the SMT devices. I say thats hard to believe,
a
component should respond based on its electrical rating and
characteristics
not whether it is mount thru or on the pcb.
Any thoughts comments or remarks feel free????!!!!!!!
Thanks,
SAK
************************************************************************
***
* TechNet mail list is provided as a service by IPC using SmartList
v3.05 *
************************************************************************
***
* To subscribe/unsubscribe send a message <to: [log in to unmask]>
*
* with <subject: subscribe/unsubscribe> and no text in the body.
*
************************************************************************
***
* If you are having a problem with the IPC TechNet forum please contact
*
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]
*
************************************************************************
***
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
