TECHNET Archives

1996

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0vDePv-0000SSC; Wed, 16 Oct 96 17:26 CDT
From [log in to unmask] Thu Oct 17 12:
03:09 1996
Date:
Wed, 16 Oct 96 17:53:41 EST
Precedence:
list
Resent-From:
Resent-Sender:
TechNet-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/6937
TO:
Return-Path:
<TechNet-request>
Resent-Message-ID:
<"upG2q2.0.IlG.C4MPo"@ipc>
Subject:
From:
Old-Return-Path:
X-Loop:
Message-Id:
Parts/Attachments:
text/plain (69 lines)
     Besides hardness, our customer has indicated that underlying copper 
     surface topography (i.e., roughness) is a key factor - that, for 
     example, different surface prep methods prior to Ni/Au electroplate 
     (e.g., peroxide-sulfuric u-etch, persulfate u-etch, pumice w/ brushes, 
     pumice w/out brushes, even panel orientation relative to the 
     brushes!!) will affect wire bond yields.  Can anyone corroborate 
     this??  And if this theory holds, wouldn't a final pumice of the 
     plated gold surface itself improve things further?  Is there a 
     softness threshold below which an abrasive slurry could contaminate 
     the gold?? 
     
     J.Felts
     PC World, Toronto


______________________________ Reply Separator _________________________________
Subject: Re: Wire Bonding
Author:  [log in to unmask] at INET
Date:    10/16/96 3:06 PM


     We also monitor Knoop hardness of the plated deposit from our soft 
     gold bath on a monthly basis. Knoop hardness should be under 80 knoop 
     for gold wire bonding.
     
     Kim
     Hadco Ca.
     
     
______________________________ Reply Separator _________________________________
Subject: Wire Bonding
Author:  [log in to unmask] at SMTPLINK-HADCO 
Date:    10/15/96 7:08 PM
     
     
Advice please !
Is there a quantitative test that can be carried out on soft gold electroplate 
to qualify its suitability for wire bonding ?
 Gold thickness and purity already to customers spec.
Note in this instance gold is on a nickel undercoat.
     
Jim Douglas
Kam Circuits
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To unsubscribe from this list at any time, send a message to:           * 
* [log in to unmask] with <subject: unsubscribe> and no text.        * 
***************************************************************************
     
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To unsubscribe from this list at any time, send a message to:           * 
* [log in to unmask] with <subject: unsubscribe> and no text.        * 
***************************************************************************
     

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************



ATOM RSS1 RSS2