Subject: | |
From: | |
Reply To: | |
Date: | Thu, 2 Aug 2012 06:23:44 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Juliano,
Hard to answer because we don't know what kind of cable you're trying to solder
into the board. We also don't know what kind of board it is (how thick, etc.).
Do you tin the wire at the end of the cable first?
Steve Gregory
________________________________
From: Juliano Ribeiro <[log in to unmask]>
To: [log in to unmask]
Sent: Thu, August 2, 2012 8:57:40 AM
Subject: [TN] MCPCB - Soldering
Hello,
We need to do manual solder in MCPCB - Cable in the MCPCB. But the tip hot is
higher and the solder nonwetting in the MCPCB just in the cable.
1 - We need change our manual solder process? Special tips or soldering station
we need to buy? What the correct temperature to solder in this board?
2 - In the SMT process (LED Soldering), are what caution during reflow?
Thank you
Juliano Ribeiro
Coordenador de Produção - Placas Eletrônicas
Elo Sistemas Eletrônicos S.A.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|