 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0w0bqI-00081BC; Fri, 28 Feb 97 17:35 CST |
| Content-Type: |
text/plain; charset=ISO-8859-1 |
| Old-Return-Path: |
|
| Date: |
Sat, 1 Mar 1997 07:43:24 +0800 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| X-Mailing-List: |
|
| X-MSMail-Priority: |
Normal |
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| X-Loop: |
|
| Message-ID: |
<19970228234450.AAA27451@defult> |
| From [log in to unmask] Mon Mar 3 13: |
07:59 1997 |
| Resent-Message-ID: |
<"8OTwP1.0.Y3K.Sls5p"@ipc> |
| Subject: |
|
| From: |
|
| Content-Transfer-Encoding: |
7bit |
| TO: |
|
| X-Mailer: |
Microsoft Internet Mail 4.70.1155 |
| X-Priority: |
3 |
| Parts/Attachments: |
|
|
From: Scott Westheimer
Date: 3/1/97
I would like to seek help from all of you out there. I have been asked to
help set up a DOE to determine what length of rivets is best, how mush
pressure should be applied when installing rivets, how much longer should
the rivet be then the total thickness of the material being riveted, how
big should the hole be, and do we want the rivets loosely clapped into the
hole or tightly clapping the material.
Since I have little experience in this area I would appreciate any help
anyone can offer.
Thanks.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
