Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 16 Aug 1999 11:57:28 +1000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Paul
There's no dignity as long as we bleed, visit toilets and kill to live ;
believe me .
I've just had this nice carrot in fridge ; it's spring here ; and that poor
orange thing sprouted roots ; shot few green cute leaves and there I was :
chopping it to a salad !
Did cry before the onions ; being the new age sensitive fellow.........
Luckily most of us are sufficiently preprogrammed with appropriate
limitations .
Anyhow :
I think Chuck misread your few thousands PER HOUR as just few thousands .
If you have this hours lasting years ; true some of the gear
(axial,radial,loose: cutter/formers)is made in SEAsia ;
still ; for lasting blades you need to do better .
I'd recommend EBSOMAT ; if you need reliability ;
as Steve said : get on the DOGPILE multisearch engine ; type the agenda ,
some of the preforming options are quite ingenious .
Even if you would not have the budget for it (the hand mills are cheap
enough) ;
you learn enough to find your own way .
When I started in my poor old days ; we guillotined radials with a paper
cutter (as few of us did) .
Have a fun (best rum(J)in the grog, by the way)
paul
-----Original Message-----
From: Paul Tomlinson [mailto:[log in to unmask]]
Sent: Sunday, 15 August 1999 22:08
To: [log in to unmask]
Subject: [TN] Lead cutter/former.
Hi Technetters,
I have been reading technet for some time now and have found much of
interest
there.
This may be rather beneath the dignity of most of the technetters but I need
a
manually operated lead cutter/former capable of doing a few thousand parts
per
hour.
They seem to be still being made in the Far-East or if anyone has a used one
to
sell I would be very happy to buy it.
Paul
----------------------------------------------------------------------
Paul Tomlinson, Professional Services, 11 South Ave, Kgn 5, Jamaica
Main - <[log in to unmask]> Backup - <[log in to unmask]>
voice (876) 929-7777 fax (876) 929-0807
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|