 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0tmIUr-0000AxC; Tue, 13 Feb 96 05:02 CST |
| Content-Type: |
text/plain; charset="iso-8859-1" |
| Old-Return-Path: |
|
| Date: |
Tue, 13 Feb 1996 12:12:28 +0100 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| Content-Transfer-Encoding: |
quoted-printable |
| Status: |
O |
| X-Mailing-List: |
|
| X-Sender: |
|
| TO: |
|
| Return-Path: |
|
| X-Status: |
|
| Resent-Message-ID: |
<"rGE3D2.0.U38.k-68n"@ipc> |
| From [log in to unmask] Tue Feb 13 14: |
34:07 1996 |
| From: |
|
| X-Loop: |
|
| Mime-Version: |
1.0 |
| Subject: |
|
| Message-Id: |
<v01520d02ad46229759f7@[129.132.54.198]> |
| Parts/Attachments: |
|
|
Hi Andy
The maximum elongation for eutectic solder to failure depends very strong
on the temperatrure and the strain-rate. If you deform solder very fast it
can not endure more than say 2%. If you induce a strain rate below 10 E-4
you can deform solder at room temperature over 100%. Heating the material
to 50°C will ease the problem to a considerable extend.
Guenter Grossmann
|
|
|
