TECHNET Archives

May 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wUGZr-000Bj1C; Wed, 21 May 97 13:57 CDT
Content-Type:
text/plain; charset=us-ascii
Old-Return-Path:
<[log in to unmask]>
Date:
Wed, 21 May 1997 14:11:46 -0500
Precedence:
list
Reply-To:
[log in to unmask]
Message-ID:
<[log in to unmask]>
MIME-Version:
1.0
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/12873
TO:
[log in to unmask]
X-Status:
>From bergdi Wed May 21 13:
57:55 1997
X-Loop:
[log in to unmask]
From [log in to unmask] Wed May 21 14:
15:51 1997
Resent-From:
[log in to unmask]
Content-Transfer-Encoding:
7bit
Resent-Message-ID:
<"NpFWt.0.TlE.UMqWp"@ipc>
Subject:
Re: ASSY: solder choices for Elkonite
From:
"[log in to unmask]" <[log in to unmask]>
Return-Path:
<TechNet-request>
X-Mailer:
Mozilla 3.0Gold (Win95; I)
Organization:
[log in to unmask]
Resent-Sender:
TechNet-request [log in to unmask]
Parts/Attachments:
text/plain (27 lines) 
Your best bet is most likely to go with a good conductive epoxy that has
thermal properties which can withstand the demands you have.  Here at
Vines we have had excellent results using conductive epoxy, although we
have not pushed the end environment quite as harsh as you are requiring.

[log in to unmask]
______________________Reply Separator__________________
Hi all,

Does any one have any suggestions for a solder type to attach Elkonite
to aluminum?  My primary concern is the CTE differences; this is for an
assembly that sees temps from -65C to almost 200C ... thanks for any
thoughts!

Sheila Smith, Tracor AES

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2