Subject: | |
From: | |
Reply To: | |
Date: | Tue, 4 May 1999 12:47:15 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Mark
Changing to Titanium will not help!
Steel is 1.8 times as stiff as Titanium and much cheaper to buy (especially
in UK). Titanium is also harder to machine / punch and cannot be hardened as
easily.
If you want to double the stiffness of the plates make them 25% thicker
(cube law for stiffness).
Hope this helps
Regards
Fin
Finlay Buchan
Technical Director
Datum Dynamics Ltd
Tel +44 (0)1290 426200
Fax +44 (0)1290 426212
Email [log in to unmask]
Web Page http://www.datumdynamics.com
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Mark Austin
Sent: Thursday, April 29, 1999 8:51 AM
To: [log in to unmask]
Subject: [TN] Titanium Lead Cropping Plates
Good Morning Fellow Techies.
Has anyone out there ever used or heard of Titanium mass lead cropping
plates? We are suffering from warping with our current plates and someone
has suggested using titanium.
Thanks
Mark Austin (Process Engineer)
ACW Technology Limited
Hylton Road
Petersfield
GU32 3XX
ENGLAND
TEL - +44 (0) 1730 300000
FAX - +44 (0) 1730 266045
Email - [log in to unmask]
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|