Hi Scott - Tyco Electronics has completed some studies on surface finishes
and compliant pins which may be of interest in your investigations/testing.
The web link is
http://www.tycoelectronics.com/environment/leadfree/techdata.stm
. Good Luck.
Dave Hillman
Rockwell Collins
[log in to unmask]
Scott Lefebvre
<ScottLefebvre@NV To: [log in to unmask]
ISION1.COM> cc:
Sent by: TechNet Subject: [TN] Compliant Pin Immersion Silver finnish
<TechNet@listserv
.ipc.org>
06/05/2003 10:56
AM
Please respond to
"TechNet E-Mail
Forum."; Please
respond to Scott
Lefebvre
I have been thinking of trying out Immersion silver on one of our existing
boards and had a few questions. My under standing is that not all
immersion silver is created equal at all the board shops. The board I was
going to try it on also uses compliant connectors. I read an article that
said, immersion silver could be a problem if you use compliant connectors.
Any advice would be greatly appreciated!
Scott Lefebvre
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------