Thanks all,
I got the info I needed in under an
hour! What a great group. Best regards,
Dave
At 06:49 PM 8/25/03, you wrote:
>Hello Dave,
>The same has Mel stated, my MIL-P-13949 is out of reach at the moment, sorry.
>However, IPC 4101 on page 19, has a list of SPEC. SHEETS, and a cross reference
>( to some extent) therefore MIL-P-13949/4 is referenced on these sheets,
>
>IPC 4101/21; /24; /25; /26, that is four separate spec sheets.
>
>Again sorry I can't be more specific at the moment.
>A quick guess is this may include a lot or most FR-4's in existence. The range of Tg's,
>110 C to 220 C does not exclude many laminates. Caveat emptor, choose wisely and good luck.
>Sincerely,
>Paul Holloway; <mailto:[log in to unmask]>[log in to unmask]
>-----Original Message-----
>From: Dave Dixon [mailto:[log in to unmask]]
>Sent: Monday, August 25, 2003 3:20 PM
>To: [log in to unmask]
>Subject: [TN] Mil Spec help
>
>Hi Technetters,
> I am looking for information on board
>material conforming to MIL-P-13949/4 Type GFN.
>I searched for this spec. at assist.daps.dla.mil
>without success.
> Any clues would be appreciated on where to find
>this spec. Thanks in advance.
>Dave
Dave Dixon
Engineering Technician
Aero-Mach Labs Inc.
7707 E. Funston
Wichita, KS 67207-3121
phone (316) 219-2243
fax (316) 219-2295
www.aeromach.com
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|