TECHNET Archives

June 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Wires being used on PCB Assemblies
From:
Robert Carver <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 2 Jun 1998 15:24:05 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (30 lines) 
My name is Rob Carver at Harrington Signal Inc. in Moline Illinois.
Our Quality Assurance Supervisor recently quit and the inspectors have a
question that I as a ISO manager cannot answer, so I'll post a message.
The question is must wires that are soldered directly to PCB assemblies
be:
a.      Pre-tinned??
b.      Have both top and bottom side solder and the correct percentage
of fill.

The IPC book doesn't really address this point.

Rob Carver
Harrington Signal Inc.
2519 4th Avenue
Moline, Illinois  61265
1-800-577-5758
[log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2