TECHNET Archives

June 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Wires being used on PCB Assemblies
From:
Peggi Blakley <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 2 Jun 1998 15:58:01 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (57 lines) 
Rob,
        What type of wires are you using, stranded or solid? When attaching to the
PCB assembly, is it to a plated through hole or some other type of
connection?

> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Robert Carver
> Sent: Tuesday, June 02, 1998 3:24 PM
> To: TechNet
> Subject: [TN] Wires being used on PCB Assemblies
>
>
> My name is Rob Carver at Harrington Signal Inc. in Moline Illinois.
> Our Quality Assurance Supervisor recently quit and the inspectors have a
> question that I as a ISO manager cannot answer, so I'll post a message.
> The question is must wires that are soldered directly to PCB assemblies
> be:
> a.      Pre-tinned??
> b.      Have both top and bottom side solder and the correct percentage
> of fill.
>
> The IPC book doesn't really address this point.
>
> Rob Carver
> Harrington Signal Inc.
> 2519 4th Avenue
> Moline, Illinois  61265
> 1-800-577-5758
> [log in to unmask]
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask]
> or 847-509-9700 ext.312
> ################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2