TECHNET Archives

December 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Date:
Mon, 8 Dec 2008 18:25:38 -0500
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Werner engelmaier <[log in to unmask]>
Subject:
From:
Werner engelmaier <[log in to unmask]>
Content-Type:
text/plain; charset="utf-8"
In-Reply-To:
Content-Transfer-Encoding:
quoted-printable
MIME-Version:
1.0
Parts/Attachments:
text/plain (480 lines)
 Hi Arnoud,
Your first mistake is the assumption that it is 'experts' that designed BGA with heatsinks---if they were experts they would not have done what they did.
Do you know that many of the BGA vendors have quietly switched to SAC 105 from SAC305—the consequence is higher Liquidus/soldering temperature and lower fatiue life.
Have a problem sending the pic from the road.

Werner
 

 


 

-----Original Message-----
From: [log in to unmask]
To: TechNet E-Mail Forum <[log in to unmask]>; Werner engelmaier <[log in to unmask]>
Sent: Sun, 7 Dec 2008 9:43 am
Subject:  Re: [TN] 答复: Re: [TN] BGA soldering open issue











Please copy me when you send the pictures. I never realized that BGA heatsinks could cause these issues. I figures the experts that designed BGA heatsinks made sure they wouldn't decrease reliability. As a contract assembler we would assume the failed BGA was from either the BGA mfg or something in our process and therefore repair as the board under warrantee. How would I look at a cutomer design relative to the heat sink used. They  pick the size and shape for heat transfer because only the customer knows what the final system and thermal transfer properties are. We just assemble the board using their required parts.


 


-------------- Original message -------------- 
From: Werner engelmaier <[log in to unmask]> 

> Hi Arnaud, 
> A BGA with an attached heatsink is causing the BGA to be thermally 
> unsymmetrical--and you get warp
age by the 'bimetallic strip' effect. 
> I show some nice shadow moire pictures [courtesy Advanced Semiconductor 
> Engineering Inc.] showing 9 mils of warpage fro 20 to 240°C in my workshops. 
> 
> Werner 
> 
> 
> 
> 
> 
> 
> 
> -----Original Message----- 
> From: Arnaud Grivon 
> To: Werner engelmaier 
> Sent: Fri, 5 Dec 2008 9:21 am 
> Subject: Re: [TN] 答复: Re: [TN] BGA soldering open issue 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Hello Werner, 
>
 Â 
> 
> Could you please elaborate on your posting stating that BGAs with 
> heatsinks are more prone to warpage during assembly? 
> 
> Are you thinking of cavity down BGA (such as SBGA), FC-PBGA, or...? 
> 
> Would you have any publication/article to share? 
> 
> I thank you in advance for your support. 
> 
> Best regards, 
> Â 
> 
> Arnaud Grivon 
> Â 
> 
> Werner engelmaier a écrit : 
> 
> > Nee hao Hechong, 
> 
> > BGAs with heatsinks have been shown to warp and thus loading the SJs in 
> tension. 
> 
> >Â 
> 
> > Werner 
> 
> >Â 
> 
> >Â 
> 
> > 
> >Â 
> 
> >Â 
> 
> > 
> >Â 
> 
> > -----Original Message-----Â 
> 
> > From: Cong He  
> 
> > To
: [log in to unmask]Â 
> 
> > Sent: Thu, 4 Dec 2008 10:08 pm 
> 
> > Subject: [TN] ç­”å¤C2: Re: [TN] BGA soldering open issue 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> > surface fin 
> ish is hasl. 
> >Â 
> 
> > after analysed parts of the board, we found some balls of the bga rupture. 
> 
> > Could it be the material of the ball(BGA) cause the problem? 
> 
> >Â 
> 
> > by the way, there is a heatsink which is double size lager than the chip 
> > stick on it without other fixture. 
> 
> > will the heatsink be the reason? 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> &
gt;Â 
> 
> >Â 
> 
> > Hechong 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> > "Wenger, George M." 
> > 发件人: TechNet  
> 
> > 2008-12-05 10:57Â 
> 
> > 请答复 给 
> 
> > TechNet E-Mail Forum ; 请答复 给 
> 
> > "Wenger, George M." Â 
> 
> >Â 
> 
> >Â 
> 
> > 收件人 
> 
> > [log in to unmask]Â 
> 
> > 抄送 
> 
> >Â 
> 
> > 主题 
> 
> > Re: [TN] BGA solder
ing open issue 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> > What is the surface finis
h on your PCBA? 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> > Necong, 
> 
> >Â 
> 
> > What is the surface finish on your PCBA? 
> 
> >Â 
> 
> > Regards, 
> 
> > George 
> 
> > George M. Wenger 
> 
> > Andrew Wireless Solutions 
> 
> > Senior Principal FMA / Reliability Engineer 
> 
> > 40 Technology Drive, Warren, NJ 07059Â 
> 
> > (908) 546-4531 [Office] (732) 309-8964 [Cell]Â 
> 
> > [log in to unmask]Â 
> 
> > 
> >Â 
> 
> > -----Original Message-----Â 
> 
> > From 
> : TechNet [mailto:[log in to unmask]] On Behalf Of Cong He 
> 
> > Sent: Thursday, December 04, 2008 9:09 PMÂ 
> 
> > To: [log in to unmask]Â 
> 
> > Subject: [TN] BGA soldering ope 
> 

> > n issue 
> 
> >Â 
> 
> > dear all:Â 
> 
> >Â 
> 
> > I am facing a problem of bga soldering. 
> 
> >Â 
> 
> > when the board have just soldered ,it pass all test. 
> 
> > But after sometime, maybe for a few weeks, 
> 
> > some of the bga balls opened. the function became normal if i press the 
> > chip on the top side. 
> 
> >Â 
> 
> > It seems that the pcb didn't warp much,it seems even no warp at
 all. 
> 
> > Does any of you know why? And how to improve? 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> > Hechong 
> 
> >Â 
> 
> > ---------------------------------------------------Â 
> 
> > Technet Mail List provided as a service by IPC usin
g LISTSERV 15.0Â 
> 
> > To unsubscribe, send a message to [log in to unmask] with following text 
> 
> > in 
> 
> > the BODY (NOT the subject field): SIGNOFF Technet 
> 
> > To temporarily halt or (re-start) delivery of Technet send e-mail to 
> 
> > [log in to unmask]: SET Technet NOMAIL or (MAIL)Â 
> 
> > To receive ONE mailing per day of all the posts: send e-mail to 
> 
> > [log in to unmask]: SET Technet Digest 
> 
> > Search the archives of previous posts at:Â 
> 
> > http://listserv.ipc.org/archives 
> 
> > Please visit IPC web site 
> 
> > http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional 
> 
> > information, or contact Keach Sasamori at sasako@ 
> ipc.org or 847-615-7100Â 
> 
> > ext.2815Â 
> 
> > ----------------------------------------------
-------Â 
> 
> >Â 
> 
> >Â 
> 
> > No virus found in this incoming message. 
> 
> > Checked by AVG - http://www.avg.com 
> > Version: 8.0.176 / Virus Database: 270.9.13/1828 - Release Date:Â 
> 
> > 12/4/2008 8:05 AMÂ 
> 
> > 
> ---------------------------------------
----------------------------------------- 
> ----------------Â 
> 
> > This message is for the designated recipient only and may 
> 
> > contain privileged, proprietary, or otherwise private information. 
> > If you have received it in error, please notif 
> 
> > y the sender 
> 
> > immediately and delete the original. Any unauthorized use of 
> 
> > this email is prohibited. 
> 
> > 
> -------------------------------------------------------------------------------- 
> ----------------Â 
>
; 
> > [mf2]Â 
> 
> >Â 
> 
> >Â 
> 
> > ---------------------------------------------------Â 
> 
> > Technet Mail List provided as a service by IPC using LISTSERV 15.0Â 
> 
> > To unsubscribe, send a message to [log in to unmask] with following text in 
> 
> > the BODY (NOT the subject field): SIGNOFF Technet 
> 
> > To temporarily halt or (re-start) delivery of Technet send e-mail to 
> > [log in to unmask]: SET Technet NOMAIL or (MAIL)Â 
> 
> > To receive ONE mailing per day of all the posts: send e-mail to 
> > [log in to unmask]: SET Technet Digest 
> 
> > Search the archives of previous posts at: http://listserv.ipc.org/archives 
> 
> > Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
> > for additional information, or contac 
> t Keach Sasamori at [log in to unmask] 
or 
> > 847-615-7100 ext.2815Â 
> 
> > -----------------------------------------------------Â 
> 
> >Â 
> 
> 
>Â 
> 
> >Â 
> 
> >Â 
> 
> >Â 
> 
> > 
> >Â 
> 
> >Â 
> 
> > ---------------------------------------------------Â 
> 
> > Technet Mail List provided as a service by IPC using LISTSERV 15.0Â 
> 
> > To unsubscribe, send a message to [log in to unmask] with following text in 
> 
> > the BODY (NOT the subject field): SIGNOFF Technet 
> 
> > To temporarily halt or (re-start) delivery of Technet send e-mail to 
> [log in to unmask]: SET Technet NOMAIL or (MAIL)Â 
> 
> > To receive ONE mailing per day of all the posts: send e-mail to 
> [log in to unmask]: SET Technet Digest 
> 
> > Search the archives of previous posts at: http://li
stserv.ipc.org/archives 
> 
> > Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for 
> additional information, or contact Keach Sasamori at [log in to unmask] or 
> 847-615-7100 ext.2815Â 
> 
> > -----------------------------------------------------Â 
> 
> > 
> 
> 
> 
> 
> 
> --------------------------------------------------- 
> Technet Mail List provided as a service by IPC using LISTSERV 15.0 
> To unsubscribe, send a message to [log in to unmask] with following text in 
> the BODY (NOT the subject field): SIGNOFF Technet 
> To temporarily halt or (re-start) delivery of Technet send e-mail to 
> [log in to unmask]: SET Technet NOMAIL or (MAIL) 
> To receive ONE mailing per day of all the posts: send e-mail to 
> [log in to unmask]: SET Technet Digest 
> Se
arch the archives of previous posts at: http://listserv.ipc.org/arch
ives 
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for 
> additional information, or contact Keach Sasamori at [log in to unmask] or 
> 847-615-7100 ext.2815 
> ----------------------------------------------------- 

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2