Subject: | |
From: | |
Date: | Tue, 1 Oct 1996 09:35:07 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We use pieces of Teflon tubing (eg, insulation stripped from an
appropriately sized wire) to hold the parts off the board while we solder.
Howard Feldmesser
The Johns Hopkins University Applied Physics Laboratory
>We are currently working a job that uses NASA spec NHB5300.4(3A-2) as a
>guide for Requirements for Soldered Electrical Connections.
>Does anyone have any tricks for supporting the body of CK06 style leaded
>components which are mounted radially that needs to be supported approx.
>.060" up off the board ??? The "S" level component is not available with
>the "V" standoff on the body.
>
>Thanks
>
>Bill Kasprzak
>Moog Inc.
>716-652-2000 ext. 2507
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To unsubscribe from this list at any time, send a message to: *
>* [log in to unmask] with <subject: unsubscribe> and no text. *
>***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|