TECHNET Archives

March 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
TechNet E-Mail Forum <[log in to unmask]>, "Hogg, Blair K." <[log in to unmask]>
Date:
Mon, 5 Mar 2007 08:51:33 -0600
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, "Stadem, Richard D." <[log in to unmask]>
Subject:
From:
"Stadem, Richard D." <[log in to unmask]>
Content-Transfer-Encoding:
quoted-printable
In-Reply-To:
Content-Type:
text/plain; charset="us-ascii"
MIME-Version:
1.0
Parts/Attachments:
text/plain (111 lines)
Yours is the best answer, Blair.

The reason that EOS/ESD 20.20-1999 was written this way is because we
know that all ungrounded personnel pose a risk to unprotected devices.
Simply walking can create a tremendous charge, and without a path to
discharge (ESD footwear or heel straps) a charged body can bring a very
high voltage potential into the ESD zone. One does not have to come in
direct contact with unprotected hardware; the charge can be indirectly
fed into the exposed hardware through a bench, a metal shelf or other
conduit. There are very good reasons that the standard states that
personnel shall not enter the ESD zone unless they are wearing proper
footwear (and testing them BEFORE entering the zone) and smocks. If a
person goes into the area infrequently, they should wear heelstraps. If
they enter a zone on a regular basis they should invest in a pair of
good ESD shoes, even if they do not usually handle hardware.

The shoes are cheaper than the heel straps in the long run.

And don't forget to wear the green RoHS-compliant heel straps if you are
entering a Lead-free ESD zone!  :-)

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Hogg, Blair K.
Sent: Monday, March 05, 2007 8:22 AM
To: [log in to unmask]
Subject: Re: [TN] ESD question

Bob,

This is kind of a tricky question. If you have defined the ESD protected
area (per ANSI/ESD 20.20) as the entire room, then per the spec
requirement any personnel entering the room should have heel straps. If
the ESD protected area is only defined as the workstations within the
room, then someone entering the room will not need them. However, as
Graham pointed out, product should not be affected as long as an
ungrounded person comes no closer than 12 inches from unprotected
product (not in an ESD protective container, such as a bag or tote). 

Blair Hogg
Director of QA/Continuous Improvement
GAI-Tronics Corp.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bob Arciolla
Sent: Monday, March 05, 2007 8:57 AM
To: [log in to unmask]
Subject: [TN] ESD question

Good Morning all,

A question regarding ESD has come up in our facility. Our SMT area has
ESD flooring and the question that came up is that one of our
instructors says that anyone entering the room must have heel straps on
and another says that if a person is just going into the room and not
touching product, they don't need heel straps. Who is correct?

Regards,
Bob Arciolla
Endicott Research Group
Quality/Safety Manager
607  754-9187 ex 3034
607  754-9255   fax
cell 607 624-8516

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

*******************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this email in error please notify the
system manager.

This footnote also confirms that this email message has been swept for
the presence of computer viruses.

www.Hubbell.com - Hubbell Incorporated

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2