 
| Subject: | |
| From: | |
| Reply To: | TechNet E-Mail Forum. |
| Date: | Mon, 20 Oct 2003 11:14:39 -0500 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
Hi Jim! There are ASTM methods covering the test methods and procedures for
both torsion and 3/4 point bend tests - their application to an electronics
situation/application will be left to your engineering judgement ( start
looking in ASTM D 618). Good Luck.
Dave Hillman
Rockwell Collins
[log in to unmask]
Jim Reed
<[log in to unmask] To: [log in to unmask]
COM> cc:
Sent by: TechNet Subject: [TN] Mechanical Reliability Test Methods
<[log in to unmask]>
10/20/2003 09:51
AM
Please respond to
"TechNet E-Mail
Forum."; Please
respond to
Jim_R_Reed
A little help with Specifications please?
Are there any sort of industry standards which define the following tests:
a. three point bend test
b. four point bend test
c. ball shear test
d. board level torsion test
I am aware of a number of internal documents at several companies for many
of these. The question is: Are there any published tests that concern
themselves with these kinds of tests, such as IPC, ISO, MIL, ASTM, etc.?
Jim Reed, Global Commodity Quality Mgr.
Dell
Phone: (512) 723-5083
Fax: (512) 783-6161
Email: [log in to unmask]
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|
